Molex - Brings together innovation and technology to deliver electronic solutions to customers worldwide. With a presence in more than 40 countries, Molex offers a full suite of solutions and services for many markets, including data communications, consumer electronics, industrial, automotive, commercial vehicle and medica Molex 16 Circuit Receptacle and Plug Housing w/ Terminals 18-24 AWG Glow Wire Capable Overview: Mini-Fit Jr. and Mini-Fit Plus Power Connectors deliver up to 9.0A and 13.0A respectively, while blind-mating and terminal position assurance options offer a versatile connector system for a wide range of applications A wide range of OEMs require high-current, high-density power connectors that also support design flexibility. To meet these needs, Mini-Fit Jr., Mini-Fit Plus, Mini-Fit BMI and Mini-Fit TPA2 Connectors offer polarized housings with isolated terminals, positive locks and low-engagement forces. All versions of Mini-Fit Jr. and Mini-Fit Plus Connectors are compatible with each other, including with Mini-Fit TPA2 and Mini-Fit BMI Components, bringing flexibility to the toughest design dilemmas. |
a) A Glow Wire Ignition Temperature (GWIT) of at least 775 deg C per IEC 60695-2- 13.
b) A Glow Wire Flammability Index (GWFI) above 850 deg C per IEC 60695-2-12.
This complies with the requirements set out in the International Standard IEC 60335-1 5th edition - household and similar electrical appliances - safety, section 30 Resistance to heat and fire.
The customers using this product must determine its suitability for use in their particular application through testing or other acceptable means as described in end-product glow- wire flammability test standard IEC 60695-2-11 and any applicable product end-use standard(s).
If it is determined during the customer’s evaluation of suitability that the performance does not match customer needs, please contact Molex.
Material - Metal | Brass |
---|---|
Material - Plating Mating | Tin |
Material - Plating Termination | Tin |
Plating min - Mating | 0.889µm |
Plating min - Termination | 0.889µm |
Termination Interface: Style | Crimp or Compression |
Wire Insulation Diameter | 1.30-3.1 mm |
Wire Size AWG | 18, 20, 22,24 |