CUSTOM HORN EQUALIZER - NOT A CROSSOVER - BRAND NEW - SOLD EACH

PRODUCT INFO

SEE THE SHIPPING CALCULATOR TAB ABOVE FOR COMBINED RATES - SOLD EACH - BUY 2 FOR A PAIR

HERE'S A COOL LITTLE UNIT THAT EVERY HIGH EFFICIENCY "DIY'ER" SHOULD HAVE IN THE TOOL KIT - THESE HELP EXTEND THOSE PESKY HORNS TO 20KHz

THEY ARE FOR AN 8 OHM DRIVER & HAVE A DUAL FILTER THAT STARTS TO RISE GRADUALLY AROUND 2K AT 3DB SLOPE THEN GOES TO 6DB AROUND 6KHZ. THIS PROVIDES APPROX 9DB ATTENUATION BEFORE IT STARTS TO RISE TO FULL OUTPUT AT 20K. EACH DOT ON THE METER IS 2DB

GOOD FOR 100 WATTS RMS - IT HAS A POLYSWITCH PROTECTOR THAT MAY BE A BIT SMALL FOR SOME SYSTEMS. IF SO JUST SHORT THE LEGS OR PUT IN A BIGGER ONE TO SUIT. IF YOU NEED MORE ATTENUATION JUST ADD RESISTORS OR AN L-PAD BEFORE THE FILTER. YOU WILL NEED TO USE SOME SORT OF CROSSOVER BEFORE THIS UNIT AS WELL AS IT'S JUST AN EQ, NOT A CROSSOVER

MEASURED ON AN 8 OHM DUMMY LOAD - EACH STEP IS 2DB